Has your pool ever looked perfectly fine one week and suddenly become harder to manage the next? Chlorine demand rises, water clarity is harder to maintain, and your usual maintenance routine doesn't seem to hold as well. One possible contributor? Elevated phosphates.
Phosphates are a common (and often misunderstood) part of pool water chemistry. Phosphates (PO₄³⁻) are simply inorganic ions derived from phosphoric acid when it dissociates in water.
Phosphates are omnipresent in our world. While they occur naturally in the environment, they can also enter swimming pools through everyday sources like fill water, fertilizers, cleaning products, and even some pool chemicals.
Most of the natural sources are found in rivers, lakes and oceans, or mined rock. The United States is, in fact,one of the largest producers of phosphate from mining. They can also be found in detergents, hair care products, fertilizers, and even soda pop. Many of the foods we eat contain phosphate, which is a primary nutrient for muscle growth.
The two biggest sources of phosphates in pools come from metal sequestering products that contain phosphoric or phosphonic acid and from tap water. Some pools have phosphates due to agricultural areas or environments with heavy fertilizer use. Because phosphates are always present, the goal isn’t eradicating them completely, but maintaining control.
In balanced, well-maintained water, phosphates may not cause immediate issues. But when levels climb, they can make pools harder to manage by increasing chlorine demand and creating conditions that allow problems to develop more quickly.
Understanding where phosphates come from, how they behave in pool water, and when they become a concern is key to maintaining clear, consistent water throughout the season.
The water that you use to fill the pool can be a substantial source of phosphates. The U.S. Environmental Protection Agency (EPA) has mandated that drinking water municipalities must follow an anti-corrosion process. This is to prevent contamination of drinking water from the corrosion of older lead-based pipes.
The EPA recommends phosphate buffers be used, such as zinc ortho-phosphate. When the drinking water supply facility adds the zinc phosphate, the result will be extremely high levels of ortho-phosphate coming from the tap. There have been some reported cases of phosphate from the tap testing 1000 parts per billion (ppb).
It is important to understand that phosphates exist in many different forms. There are combined forms such as polyphosphates or sodium phosphate. These compounds are used in many of the cleaning agents and chemicals that we use in pools.
Some non-fuming acids may contain sodium phosphate. Continued use of these types of acid can lead to excessive build-up of phosphate levels. There are even some binding agents for chlorine tablets that contain phosphate compounds.
What happens when phosphates end up in swimming pool water? Some say that phosphates aren’t a problem in a well-maintained pool. Others claim they are the determining factor in pools turning green when chlorine levels are too low. The truth is somewhere in between.
It is important to understand how phosphates can make the maintenance of a pool a real problem. Phosphate is one of the prime ingredients in fertilizer. We use fertilizer to help plants grow and algae is a plant. The algae plant requires light, carbon (CO₂), and nutrients—primarily nitrogen and phosphorus—to grow.
In aquatic systems, excess nitrogen and phosphorus are the key drivers of algae blooms. Of these, the only one we can effectively control and remove is phosphate. Scientifically, phosphate is categorized as a growth limiting nutrient, meaning algae is limited if it can’t obtain phosphate.
A simple way to think about phosphates is as part of the food supply. They don’t create poor water conditions on their own, but when sanitizer levels drop or the pool is under stress, high phosphate levels can make it easier for problems to accelerate.
So, those that say phosphates are not a concern if the water is balanced and chlorinated may be correct. However, an event such as a pool party, windstorm, or even just excessive heat in the presence of high phosphate could lead to quick and resistant algae bloom.
With higher levels of phosphates, algae have more fuel to grow and turn a pool green quickly with the strong nutrient phosphate within the cells, the algae will be much more difficult to kill using an EPA registered sanitizer such as chlorine or an algaecide.
Well maintained pools may also see an increased chlorine demand from high phosphate levels. While they do not directly reduce chlorine, phosphates are the prime nutrient for the transition of algae from the spore to the blooming form. As this process occurs, more chlorine is needed to fight and prevent algae growth, even though it is not visible as a bloom. This is also what causes the need for an increased output of free chlorine from salt chlorine generators.
Whether a salt chlorine generator system or a regular pool, phosphate levels should be kept below 500 ppb, and ideally 200 ppb. At the level of 500 ppb, there will be a definite interference with salt chlorine generators to produce enough free available chlorine (FAC). When phosphate levels reach 1000 ppb in any pool, an increased chlorine demand could be observed. At extreme levels over 5,000 ppb, water quality will be seriously reduced.
As stated, earlier phosphate can be present in many combined forms. In pool water all combined forms of phosphate will end up as orthophosphates or what is called free phosphates. When we're pool water testing for phosphate, we are testing for ortho or free phosphates. Free ortho phosphates are the only form that algae can utilize as a nutrient.
As part of routine pool maintenance, regular pool water testing is essential for managing phosphates before they contribute to water quality issues.
If a pool has already turned green, testing for phosphates should not be the first step. Algae must be fully treated first using an EPA-registered sanitizer such as liquid chlorine. Once the water is clear and algae is no longer present, a phosphate test can provide an accurate reading. Testing too early can be misleading, since algae can temporarily hold phosphates and release them back into the water after treatment. Learn more with Orenda's Clean to Green procedure.
Phosphates are measured in parts per billion (ppb) using phosphate test kits or liquid reagent tests. Some test strips can provide a quick estimate, but more precise kits are recommended for accurate readings, especially at higher levels.
For best results:
When phosphate levels exceed 5,000 ppb, a dilution test is recommended. This involves mixing one part pool water with nine parts distilled water, testing the sample, and multiplying the result by 10. This helps determine whether treatment or partial draining is the better approach.
Because phosphates are commonly introduced through fill water, it’s also a good practice to periodically test your source water for spikes.
Once accurate levels are confirmed, the next step is deciding how to manage them. For those wondering how to get rid of phosphates in swimming pool water, the approach depends on concentration:
Phosphate removers are designed to reduce orthophosphate levels in the water. However, they are not intended to treat active algae or correct existing water quality issues. In heavily contaminated water, treatment may temporarily cause cloudiness as phosphates are removed. In these cases, a clarifier can help restore clarity more quickly.
Ongoing management is key. Depending on conditions, phosphate control can be handled weekly, monthly, or seasonally. The goal is to keep levels near 200 ppb, where water is easier to maintain and more stable over time.
Use this checklist as part of your regular maintenance routine to keep the phosphates in pool water under control:
Not sure what your phosphate levels mean? Use HASA’s Pool Chemical Calculator to guide your next steps with confidence.