algi-ban

Algi-Ban

Granular tri-chlor to control black algae in swimming pools.

Safety Data Sheet:
Algi-Ban SDS

Available Sizes:
2# Bottle – #64122
5# Pail – #64185
10# Pail – #64410
20# Pail – #64020
40# Pail – #64040
100# Pail – #64100

DOWNLOADS

Product Page:
Algi-Ban Product Page

Website Graphic:
Graphic1.png

Print Graphic:
Graphic1.pdf

When algae appears on the bottom of the pool:

  1. Adjust the pH of the pool water to 7.2 – 7.8.
  2. Turn off filter and wait until water is calm enough to see spots on the bottom.
  3. Brush black algae spots with a stiff bristle or wire brush.
  4. Pour approximately 1 oz. (1/8 cup) of Hasa’s Algi-Ban directly over the spot and allow it to settle to the bottom. Use enough of this product to completely cover the algae spot.
  5. Allow Algi-Ban to dissolve for a period of 45 to 60 minutes, then brush black algae away.
  6. It may be necessary to repeat treatment or allow more contact time.

When algae is located on the pool walls:

  1. Brush black algae spots with a stiff bristle or wire brush.
  2. Place 1 oz. (1/8 cup) of Hasa’s Algi-Ban in a cotton cloth.
  3. Tie off with string and lower the bag into the water so that it touches the black algae spot.
  4. Allow the bag to remain in place 45 to 60 minutes, then remove and brush algae away.
  5. In extreme cases, it may be necessary to repeat treatment or allow more contact time.
  6. For spot treatment on walls and bottom, use the prescribed dosage regardless of pool gallonage.

When pool is infested with black algae:

  1. Adjust the pH to 7.2 – 7.8.
  2. Brush black algae spots with a stiff bristle or wire brush.
  3. Add at least one pound of Algi-Ban per 4,000 gallons of pool water and broadcast it over entire pool surface all at one time.
  4. Shut down pump for 24 hours.
  5. Follow this treatment with a thorough brushing.
  6. If a few traces of black algae remain, steps 1 through 5 should be repeated or the instructions for spot black algae should be followed.
  7. In severe cases, where the pool has been neglected for long periods of time, consult your pool service expert for advice.

**Do not swim in pool during treatment and until chlorine residual has reached 1.0 ppm – 3.0 ppm. This usually takes 24 hours or can be expedited with an application of HASA’s Neutralizer.**

**This product is a strong, oxidizing and bleaching agent. It should not be used in vinyl, fiberglass, painted, or colored plastered pools.**

Talk to Your HASA Industrial Representative to Learn More

Alma Bunch

Director, Human Resources

Alma Bunch serves as Director of Human Resources for HASA, Inc. She has 25 years of collective experience in the human resources and finance fields. Ms. Bunch joined the HASA team in 2018 as Corporate Human Resources Manager and was appointed Director of Human Resources in February 2020.

Vinny Sharma

Vice President, Operations

Vinny Sharma joined HASA, Inc. in 2018 as a General Manager. He currently serves as Vice President of Operations, based in Saugus, CA. Mr. Sharma has held previous positions in the industry with other major brands such as Univar, ICL and Pepperidge Farms. Specializing in plant operations and supply chain optimization, he holds a bachelor’s degree in Chemistry and Production Engineering, and a Master’s degree in Engineering and Industrial Management from Northeastern University.

Rick Sawin

Vice President of Pool, Distribution and Sales

Rick Sawin is Vice President of Sales, Pool and Distribution at HASA, Inc. A veteran within the swimming pool product supply and water treatment industry, prior to joining HASA, he held multiple senior management positions at Leslie’s Poolmart, Inc., a leading retailer within the segment. With that organization, Mr. Sawin served consecutively as National Commercial Sales Manager, Director of Commercial Sales, Director of National Sales, Vice President of Commercial, and finally as Director of Mergers & Acquisitions. He was educated at the University of Nevada-Las Vegas.

Angela Tran

Senior Vice President, Operations

Angela Tran serves as Senior Vice President, Operations of HASA, Inc., having joined the company in 2017. Prior to joining HASA, she served as Controller of Klune Industries, a subsidiary of Precision Castparts / Berkshire Hathaway, and began her career at Howmet Aerospace. She was educated at California State University, Fullerton, and Sam Houston State University. She is also a Certified Public Accountant.

Rob Bzdil

Executive Vice President

Rob Bzdil serves as Executive Vice President for HASA, Inc., overseeing the company’s Industrial business and Supply Chain efforts. Prior to joining HASA, Mr. Bzdil held key positions in Business and New Product Development, Project and Process Engineering, Operations, Supply Chain and Finance. As a Chemical Engineer from Penn State University, he worked with Corning Glass, OxyChem and Pioneer Chlor-Alkali where he established his background in commodity and specialty chemicals.

Ken Ward

Cheif Financial Officer

Ken Ward serves as Chief Financial Officer (CFO) of HASA, Inc., having joined the company in 2017. Prior to his current role, he was Group Controller at Aerospace Dynamics International and CFO at Klune Industries, both subsidiaries of Precision Castparts & Berkshire Hathaway. Mr. Ward also has held senior positions with Technicolor and PricewaterhouseCoopers. He was educated at the University of California Los Angeles.

Chris Brink

President and CEO

Chris Brink is CEO of HASA, Inc., overseeing all strategy, management and product development for the brand. He joined the company in 2018, first serving as HASA’s Chief Operating Officer (COO). Prior to that, Mr. Brink served as Vice President of the Polyurethane Systems Division at Accella Performance Materials, a subsidiary of Carlisle Construction Materials. He also spent seven years at Henry Company, a building materials manufacturer, serving in a variety of operational roles and most recently as a Senior Vice President.